Fuel Injector

Machine Introduction：

This machine is used for oil injection and coloring of toys, mobile phone casings and various small products. The oil injection device adopts a 6-axis linkage manipulator, which drives the trajectory of the automatic spray gun, and can walk various complex motion trajectories. Continuous fuel injection operation, the movement trajectory is taught by the electronic handwheel, and several sets of movement trajectories can be stored. The machine adopts the design of the turntable 2 stations, one out and two; large products can also use the one out one method, manual loading and unloading method, manual loading At the same time, another station is in the oil injection operation, the time is effectively used, the product can rotate 360 degrees and can run at any set angle, the oil injection area is fully enclosed to ensure that the oil mist does not spread, aluminum profile frame, stainless steel Sealing plate and transparent tempered glass protection, large flow submersible pump water curtain cabinet and water storage device, the water flow is used in internal circulation, can be quickly replaced, environmental protection air outlet is set, the clamp is clamped, the equipment is widely used, the model is changed quickly, and the overall Large working space, good operability, simple and convenient operation, safe use, PLC control, touch screen display operation, foot switch start, set safety grating to protect the safety of personnel operating the machine.

Technical Parameter：

1. Capacity: 15-20 pieces/min; according to the one-out-two method (depending on product requirements and manual operation)

2. Operator: 1 person

3. Maximum fuel injection product size MM: 150*150

4. Applicable fixture: clip mode. Material: aluminum phosphate copper

5. Fuel injection method: automatic spray gun; 1 set, adjustable fuel injection volume, adjustable oil mist, adjustable fuel injection time, adjustable fuel injection pressure

6. Power supply: AC220V 5.0KW

7. Air source: 0.5-0.7MPa. 10L/MIN. Intake pipe: φ12

8. Dimensions MM: length 1500*width 1000*height 1900

9. Weight: 550Kg

10. Six-axis system: X, Y, U, V, W, C

11. Air supply pressure: 0.5~0.7MP

Support non-standard customization, provide automated production solutions and standardize intelligent production lines according to product process requirements.

Production Workshop: